|Service Temp. °C (Max)||1350-1450|
|Grain Size mm (Max)||5|
We Provide Optimum Refractory Castables that are Commonly Used for Hot Face and Back Up Linings. Our High Alumina Refractory Castables are Highly Appreciated for Low Thermal Conductivity and Low Density that Assists in Conserving Heat Energy. Low Concentration of Iron in Our Insulating Refractory Castables Makes Them Perfect for Various Industries. We Offer Insulating Refractory Castables At Very Affordable Prices Within the Specified Time Frame. We have Carved a Niche as One of the Moving Ahead Insulating Refractory Castables Manufacturers and Suppliers Based in India.
Iron and steel Industry for lining blast furnaces and for skew backs, ports and roof lining of arc – melting furnaces
For Lining of pre heaters / Converters and on all transfer lines.
Coke basis gas production plants as well as gasification plants
Boiler industry stoker arches
Locations where reducing atmospheres are encountered.
Construction of soak pit covers, forge furnaces, tunnel kilns, heat treatment
furnace car tops as well as electro-phosphorus furnaces.
Iron and steel industry
Stress relieving furnaces, boilers
|PARTICULARS||DAT-CAST NORMAL||DAT-CAST SUPER||DAT-CAST SPECIAL|
|Service Temp. °C (Max)||1400||1450||1350|
|Grain Size mm (Max)||5||5||5|
|Water Required for Casting (%)||10.5-11.5||43384||10.5-11.5|
|Bulk Density (Kg/M3) (dried at 110°C for 24 hrs.) (Min)||2.1||2.5||2.2|
|Cold Crushing Strength (kg/cm2) 110°C||250||350||400|
|Permanent Linear Change (%) At service temp (Max) 1350°C/3 hrs||±1.00||±1.00||±0.80|